Flying Arrival Information
Airport Guide for Pilots (click to download the PDF file): Media:BXM_Airport_Guide.pdf
Please note that it is RIGHT traffic for runway 1R (One Right), and LEFT traffic for runway 19L (One Nine Left).
Essentially, stay on the East side of the airport which is the opposite side from the town of Brunswick and Bowdoin College.
There is no operating tower at the airport, so please use the CTAF frequency and self announce.
CTAF: 122.725 - (Click twice for weather)
After landing, switch to 123.45 for ground ops.
Please note if you are in a helicopter, land a good distance away from parked aircraft.
The Fly-In is being held in front of Hangar 5, which is near the southern end of the ramp (approximately adjacent to the midpoint of the runway)
The red area indicates the general location of the Fly In (up is north):
From the North
Get on I-295 South towards Brunswick.
Take exit 31A to merge onto ME-196 E/Lewiston Rd toward Topsham/Brunswick
From the South
Get on I-295 North towards Brunswick.
Take exit 31 for ME-196 E toward Topsham/Brunswick.
Once on ME-196 E
Stay on 196 East for about 2.5 miles, then merge onto RT 1 North (on the left).
In approximately 2 miles, take the Cooks Corner exit (This is the first exit after you get onto RT 1).
Turn right onto ME-24 N/Bath Rd.
Go to the second traffic light and turn left into Brunswick Landing. You will see a large airplane on display on your left shortly after you make the turn. Continue straight over the speed hump, and continue on this road until you are at a "T" intersection and cannot go straight anymore. Make a left turn. You will see signs to parking and the entrance to the Fly-In, which is located at the intersection of Neptune Drive, and Orion Street.
Google map directions can be found here